Model Number: Alpha DC TIG 400
Brand Name: FONDOF
Key Specifications/Special Features:
Features:1. IGBT inverter technology, real digital control, more efficient, precise control, and energy saving2. 3 modes in 1: DC TIG + DC Pulse TIG + MMA3. Many functions to ensure high quality weld effect:
In DC TIG / DC Pulse TIG welding mode:
a) Remote control
b) High frequency start
c) Lift TIG
d) Gas check
e) Torch operation modes selective: 2T, Slope 2T, 4T, repeat 4T
f) Pulse TIG
In MMA welding mode:
a) Remote control
b) Anti-stick
c) VRD
d) ARC force
4. Whole welding process realize parameter adjustable
In DC TIG / DC Pulse TIG welding modes:
gas pre-flow time, ignition current, current up-slop time, welding current, peak current, base current, current down-slop time, finish current, gas-post flow time, pulse width, pulse frequency
In MMA welding mode:
Ignition current, Ignition time, welding current, ARC force current, anti-stick current.
5. Pulse TTG welding.
6. Store and read function: store or read whole set parameters. Convenient for more than 2 operators use the same welding machine in turn, and good for save excellent whole set parameters.
7. Built-in water cooling system.
Reasonsfor choosing this product:
1. High quality materials: IGBT, fast recovery diode comes from FUJI, Infenion and more.
2. High function performance:
a)130,000 times non-stop arc ignition test, 100% successful rate
b)fast spot welding speed: 180/minute
c)stable welding process: whole welding process, from arc start to welding finished, are precisely controlled
d)wide range of available metal: carbon steel, stainless steel, cast iron, copper, especially aluminum, aluminum alloy, etc.
3. Protection:
a)Over heat, over current, under-voltage protection: machine stops working when abnormality happens, and warning light turns on
b)Upgraded engineering plastic case: IP23S - protection grade (anti-solid substance and anti-rain)
Company advantages
1. 30 years manufacturing and R and D experience and 12 years export experience
2. 100 million USD production capacity
3. Strong R&D ability to provide technical support: engineer leader and team has 20 years R&D experience in welding and cutting industry
4. Professional after-sale service: supported by 10 years overseas service experience leader and well trained team.
In DC TIG / DC Pulse TIG welding mode:
a) Remote control
b) High frequency start
c) Lift TIG
d) Gas check
e) Torch operation modes selective: 2T, Slope 2T, 4T, repeat 4T
f) Pulse TIG
In MMA welding mode:
a) Remote control
b) Anti-stick
c) VRD
d) ARC force
4. Whole welding process realize parameter adjustable
In DC TIG / DC Pulse TIG welding modes:
gas pre-flow time, ignition current, current up-slop time, welding current, peak current, base current, current down-slop time, finish current, gas-post flow time, pulse width, pulse frequency
In MMA welding mode:
Ignition current, Ignition time, welding current, ARC force current, anti-stick current.
5. Pulse TTG welding.
6. Store and read function: store or read whole set parameters. Convenient for more than 2 operators use the same welding machine in turn, and good for save excellent whole set parameters.
7. Built-in water cooling system.
Reasonsfor choosing this product:
1. High quality materials: IGBT, fast recovery diode comes from FUJI, Infenion and more.
2. High function performance:
a)130,000 times non-stop arc ignition test, 100% successful rate
b)fast spot welding speed: 180/minute
c)stable welding process: whole welding process, from arc start to welding finished, are precisely controlled
d)wide range of available metal: carbon steel, stainless steel, cast iron, copper, especially aluminum, aluminum alloy, etc.
3. Protection:
a)Over heat, over current, under-voltage protection: machine stops working when abnormality happens, and warning light turns on
b)Upgraded engineering plastic case: IP23S - protection grade (anti-solid substance and anti-rain)
Company advantages
1. 30 years manufacturing and R and D experience and 12 years export experience
2. 100 million USD production capacity
3. Strong R&D ability to provide technical support: engineer leader and team has 20 years R&D experience in welding and cutting industry
4. Professional after-sale service: supported by 10 years overseas service experience leader and well trained team.
Parameters | Alpha DC TIG 400 |
Rated Input Voltage (V) | 3phase 380V±15% |
Input Power Frequency (Hz) | 50/60 |
Rated Input Current (A) | 38 |
Rated Input Power (KVA) | 25 |
No-load Voltage (V) | 80 |
Pulse Frequency (Hz) | 0.2-500 |
Pulse and Empty Ratio (%) | 1-99 |
External Fuse(A) | 40 |
Powr Factor | 0.7-0.9 |
Welding Current(A) | 15-400 |
Current Up-slop/ Down-slop Time (S) | 0~15 / 0~15 |
Gas Pre-flow/ Post-flow Time (s) | 0-99.9 / 0-99.9 |
Welding Thickness (mm) | 0.3-12 |
Rated Duty Cycle (%) | 60 |
Efficiency | ≥0.85 |
Insulation Grade | F |
Protection Class | IP23S |
Dimension (mm) | 1000*420*1130 |
Shipping Information:
- FOB Port: Guangzhou,Shenzhen
- Lead Time: 30 - 45 days
- Dimensions per Unit: 1.2 × 0.55 × 1.4 Meters
- Weight per Unit: 90 Kilograms
- Units per Export Carton: 1
- Export Carton Dimensions L/W/H: 1.2 × 0.55 × 1.4 Meters
- Export Carton Weight: 90 Kilograms
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe